EasyManuals Logo
Home>Zebra>Barcode Reader>DS9908

Zebra DS9908 Product Reference Guide

Zebra DS9908
546 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
Symbologies
169
Set Lengths for Interleaved 2 of 5
L1 = Parameter # 22
SSI # 16h
L2 = Parameter # 23
SSI # 17h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range. The range for Interleaved 2 of 5 lengths is 0 - 80. The default is
Length Within Range: 6 to 55.
Scan one of the following barcodes to select a length option:
One Discrete Length - Decode only I 2 of 5 symbols containing a selected length. Select the length using
the barcodes in Numeric Barcodes. For example, to decode only I 2 of 5 symbols with 14 characters,
scan I 2 of 5 - One Discrete Length, and then scan 1, 4. To correct an error or change the selection,
scan Cancel on page 426.
Two Discrete Lengths - Decode only I 2 of 5 symbols containing either of two lengths. Select lengths
using the barcodes in Numeric Barcodes. For example, to decode only I 2 of 5 symbols containing either
2 or 14 characters, scan I 2 of 5 - Two Discrete Lengths, and then scan 0, 2, 1, 4. To correct an error
or change the selection, scan Cancel on page 426.
Length Within Range - Decode I 2 of 5 symbols with a specific length range. Select lengths using the
barcodes in Numeric Barcodes. For example, to decode I 2 of 5 symbols containing between 4 and 12
characters, scan I 2 of 5 - Length Within Range, and then scan 0, 4, 1, 2. To correct an error or change
the selection, scan Cancel on page 426.
Any Length - Decode I 2 of 5 symbols containing any number of characters within the scanner’s
capability.
NOTE: When setting lengths, enter a leading zero for single digit numbers.
NOTE: Due to the construction of the I 2 of 5 symbology, it is possible for a scan line covering only a portion of the
code to transmit as a complete scan, yielding less data than is encoded in the barcode. To prevent this,
select specific lengths (I 2 of 5 - One Discrete Length, Two Discrete Lengths) for I 2 of 5 applications, or
increase the I 2 of 5 Security Level on page 173.

Table of Contents

Other manuals for Zebra DS9908

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra DS9908 and is the answer not in the manual?

Zebra DS9908 Specifications

General IconGeneral
BrandZebra
ModelDS9908
CategoryBarcode Reader
LanguageEnglish

Related product manuals