SSI Interface
262
Host Serial Response Timeout
Parameter # 155
SSI # 9Bh
Scan one of the following barcodes to specify how long the scanner waits for an ACK or NAK before resending.
Also, if the scanner wants to send, and the host has already been granted permission to send, the scanner waits
for the designated timeout before declaring an error.
NOTE: Other values are available via SSI commands.
*Low - 2 Seconds
(20)
Medium - 5 Seconds
(50)
High - 7.5 Seconds
(75)
Maximum - 9.9 Seconds
(99)
To Next Page
Loading...