Zebra DS9908 Product Reference Guide

OCR Programming
309
OCR-B
Parameter # 681
SSI # F1h A9h
Scan one of the following barcodes to enable or disable OCR-B.
OCR-A Variant (continued)
OCR-A Reserved 2
(2)
OCR-A Banking
(3)
NOTE: OCR is not as secure as a barcode. To decrease OCR misdecodes and speed OCR reading, set an
accurate OCR template and character subset, and use a check digit. See OCR Subset on page 318 and
OCR Template on page 319.
Enable OCR-B
(1)
*Disable OCR-B
(0)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)