Symbologies
202
Intercharacter Gap Size
Parameter # 381
SSI # F0h, 7Dh
The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small. Due to various
barcode printing technologies, this gap can grow larger than the maximum size allowed, preventing the scanner
from decoding the symbol. If this problem occurs, scan the Large Intercharacter Gaps parameter to tolerate these
out-of-specification barcodes.
Composite
Composite CC-C
Parameter # 341
SSI # F0h 55h
Scan one of the following barcodes to enable or disable Composite barcodes of type CC-C.
*Normal Intercharacter Gaps
(6)
Large Intercharacter Gaps
(10)
NOTE: The default value is based on model type: The default for SR/DL models is disable; The default for HD/HL
models is enable.
*
Enable CC-C
(1)
(Default - HD/HL Models)
*
Disable CC-C
(0)
(Default - SR/DL Models)
To Next Page
Loading...
Need help?
General
