Zebra DS9908

Symbologies
191
Korean 3 of 5
Parameter # 581
SSI # F1h 45h
Scan one of the following barcodes to enable or disable Korean 3 of 5.
Inverse 1D
Parameter # 586
SSI # F1h 4Ah
Scan one of the following barcodes to set the 1D inverse decoder setting:
• Regular Only - The scanner decodes regular 1D barcodes only.
• Inverse Only - The scanner decodes inverse 1D barcodes only.
• Inverse Autodetect - The scanner decodes both regular and inverse 1D barcodes.
NOTE: The length for Korean 3 of 5 is fixed at 6.
Enable Korean 3 of 5
(1)
*Disable Korean 3 of 5
(0)
NOTE: The Inverse 1D setting may impact Composite or Inverse Composite decoding. See Composite Inverse
on page 204.