Zebra DS9908

OCR Programming
307
OCR Programming Parameters
OCR-A
Parameter # 680
SSI # F1h A8h
Scan one of the following barcodes to enable or disable OCR-A.
OCR Template 547 F1h 23h 54R 319
OCR Check Digit Modulus 688 F1h B0h 1 329
OCR Check Digit Multiplier 700 F1h BCh 121212121212 329
OCR Check Digit Validation 694 F1h B6h None 330
Inverse OCR 856 F2h 58h Regular 336
OCR Redundancy 1770 F8h 06h EAh Level 1 337
Table 24 OCR Programming Default Table (Continued)
Parameter
Parameter
Number
SSI Number Default Page Number
NOTE: OCR is not as secure as a barcode. To decrease OCR misdecodes and speed OCR reading, set an
accurate OCR template and character subset, and use a check digit. See OCR Subset on page 318 and
OCR Template on page 319.
Enable OCR-A
(1)
*Disable OCR-A
(0)