Zebra DS9908

Symbologies
179
CLSI Editing
Parameter # 54
SSI # 36h
Scan Enable CLSI Editing to strip the start and stop characters and insert a space after the first, fifth, and tenth
characters of a 14-character Codabar symbol if the host system requires this data format.
NOTIS Editing
Parameter # 55
SSI # 37h
Scan Enable NOTIS Editing to strip the start and stop characters from a decoded Codabar symbol if the host
system requires this data format.
NOTE: Symbol length does not include start and stop characters.
Enable CLSI Editing
(1)
*Disable CLSI Editing
(0)
Enable NOTIS Editing
(1)
*Disable NOTIS Editing
(0)