To Next Page

To Previous Page

User Preferences & Miscellaneous Options

Prefix/Suffix Values

Key Category Parameter # P = 99, S1 = 98, S2 = 100

SSI # P = 63h, S1 = 62h, S2 = 64h

Decimal Value Parameter # P = 105, S1 = 104, S2 = 106

SSI # P = 69h, S1 = 68h, S2 = 6Ah

You can append a prefix and/or one or two suffixes to scan data for use in data editing. To set a value for a prefix

or suffix, scan one of the following barcodes, and then scan four barcodes from Numeric Barcodes that correspond

to that value. See ASCII Character Sets for the four-digit codes.

When using host commands to set the prefix or suffix, set the key category parameter to 1, and then set the 3-digit

decimal value. See ASCII Character Sets

for the four-digit codes.

The default prefix and suffix value is 7013 <CR><LF> (Enter key). To correct an error or change a selection,

scan Cancel on page 426

NOTE: To use Prefix/Suffix values, first set the Scan Data Transmission Format on page 86.

Scan Prefix

(7)

Scan Suffix 1

(6)

Scan Suffix 2

(8)

Data Format Cancel

Zebra DS9908 Product Reference Guide

Other manuals for Zebra DS9908