404
Introduction
The imager supports downloading a custom tone to sound when a good decode occurs. Create the audio tone
according to the following specifications:
• Use a WAV audio file format; acceptable file extensions are .wav and .wave.
• Encode the audio file at 16 samples per second, i.e., 16 kHz sampling rate.
• Encode the audio file at 16 bits per sample.
• Encode the audio file with a single channel (mono).
• WAVE audio type/format = PCM (Pulse Coded Modulation).
• Ensure the audio file does not exceed 65 kBytes.
• Ensure the audio file name does not exceed 31 bytes.
Custom Tone
To Next Page
Loading...
Need help?
General
