Zebra DS9908 Product Reference Guide

OCR Programming
315
US Currency Serial Number
Parameter # 683
SSI # F1h ABh
Scan one of the following barcodes to enable or disable US Currency Serial Number.
OCR Orientation
Parameter # 687
SSI # F1h AFh
Select one of five options to specify the orientation of the OCR to read:
• 0
o
to the imaging engine (default)
• 270
o
clockwise (or 90
o
counterclockwise) to the imaging engine
• 180
o
(upside down) to the imaging engine
• 90
o
clockwise to the imaging engine
• Omnidirectional
Setting an incorrect orientation can cause misdecodes.
NOTE: OCR is not as secure as a barcode. To decrease OCR misdecodes and speed OCR reading, set an
accurate OCR template and character subset, and use a check digit. See OCR Subset on page 318 and
OCR Template on page 319.
Enable US Currency
(1)
*Disable US Currency
(0)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)