Zebra DS9908 Product Reference Guide

User Preferences & Miscellaneous Options
70
Hands-free Mode
Parameter # 630
SSI # F1h 76h
Scan one of the following barcodes to enable or disable hands-free mode:
• Enable Hands-free Mode - When you place the scanner in Intellistand, it automatically triggers when
presented with a barcode. Lifting the scanner or pulling the trigger causes it to behave according to the
setting of the Hand-held Trigger Mode on page 69.
• Disable Hands-free Mode - The scanner behaves according to the setting of the Hand-held Trigger Mode
on page 69 regardless of whether it is hand-held or in Intellistand.
*Enable Hands-free Mode
(1)
Disable Hands-free Mode
(0)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)