User Preferences & Miscellaneous Options
82
Product ID (PID) Value
Parameter # 1725
SSI # F8h 06h BDh
To set a Product ID value, scan Set PID Value, and then scan four numeric barcodes in Numeric Barcodes that
correspond to the value. Enter a leading zero for single digit numbers. To correct an error, or change a selection,
scan Cancel on page 426. The range is (0,1600-1649).
ECLevel
Parameter # 1710
SSI # F8h 06h AEh
To set an ECLevel value, scan Set ECLevel, and then scan five numeric barcodes in Numeric Barcodes that
correspond to the desired level. Enter a leading zero for single digit numbers. To correct an error, or change a
selection, scan Cancel on page 426.
Contact the Zebra Customer Support Center online at: www.zebra.com/support
for more information.
NOTE: This parameter is applicable to customers using a Firmware Flash Update per the Toshiba Global
Commerce Solutions (TGCS) Universal Serial Bus OEM Point-of-Sale Device Interface.
Set PID Value
NOTE: This parameter is applicable to customers using a Firmware Flash Update per the Toshiba Global
Commerce Solutions (TGCS) Universal Serial Bus OEM Point-of-Sale Device Interface. It allows a
customer to define an ECLevel value in order to manage and control Flash Update operations on the
4690 operating system.
Set ECLevel
To Next Page
Loading...
Need help?
General
