Zebra DS9908 Product Reference Guide

OCR Programming
330
For example:
ISBN 0 2 0 1 1 8 3 9 9 4
Multiplier 10 9 8 7 6 5 4 3 2 1
Product 0 18 0 7 6 40 12 27 18 4
Product add 0 + 18 + 0 + 7 + 6 + 40 + 12 + 27 + 18 + 4 = 132
ISBN uses Modulus 11 for the check digit. In this case, 132 is divisible by 11, so it passes the check digit.
To set the check digit multiplier, scan the following barcode, and then scan numbers and letters to form the
multiplier string from Alphanumeric Barcodes. Then scan End of Message on page 319.
OCR Check Digit Validation
Parameter # 694
SSI # F1h B6h
Use the following options to protect against scanning errors by applying a check digit validation scheme.
None
No check digit validation, indicating no check digit is applied. This is the default.
OCR Check Digit Multiplier
*No Check Digit
(0)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)