Zebra DS9908 Product Reference Guide

358
Digimarc
Introduction
Digimarc Barcode is a machine-readable code that is invisible to people.
Digimarc Symbology Selection
Digimarc codes are reported as UPC-A, UPC-E, EAN-13 or GS1 DataBar Expanded.
AIM and Symbol code IDs are supported for the reported Digimarc code types.
Picklist
The Digimarc decoder searches configured block areas of the image for Digimarc codes. The Digimarc decoder
works the same whether or not Picklist is enabled or disabled.
NOTE: SR and DL models support Digimarc.
HD and HL (HD focus with DL parsing) models do not support Digimarc.
NOTE: Conversion of the Digimarc reported code types to other barcode types is not supported.
NOTE: Decode time could be greater given the extra processing done by system and decoder when in Picklist
mode.

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)