About This Guide
24
Accessories
The scanner ships with the DS9908 Quick Start Guide. The following required accessories must be ordered:
• Interface cable for the appropriate interface. For example, a shielded connector cable when connecting via
USB.
• Universal power supply, if the interface requires this.
The product configurations related to the DS9908 scanner are listed in Table 2.
NOTE: Check Solution Builder for additional information regarding all available accessories, and the latest available
configurations.
IMPORTANT: If you already have existing non shielded cables from legacy products (such as the
DS9808) they can be reused. However, be aware that the shielded cables provide
improved ESD performance.
Table 2 Scanner Accessories
Product Type Part Number Description
Cables For information about cables, cable compatibility, and the full list of supported cables go to the
Zebra Partner Portal at:
https://partnerportal.zebra.com/PartnerPortal/product_services/downloads_z/barcode_scann
ers/Universal-Cable-Guide-Bar-Code-Scanners.xlsx.
Stands and
Holders
(optional)
BRKT-MM0099C-04 DS9908 Multi-mount bracket, Black. Can be used as wall mount
or table mount. See Mounting the Scanner on page 33 for
installation instructions.
Power Supplies
(if required)
PWR-WUA5V4W0US Power Supply, 5VDC, 100 - 240VAC, US/CA/MX/JP/TW
PWR-WUA5V4W0BR Power Supply, 5VDC, 100 - 240VAC, KR (Korea)
PWR-WUA5V4W0EU Power Supply, 5VDC, 100 - 240VAC, EU/UK
PWR-WUA5V4W0CN Power Supply, 5VDC, 100 - 240VAC, CN
PWR-WUA5V4W0AU Power Supply, 5VDC, 100 - 240VAC, HK/AU
To Next Page
Loading...
Need help?
General
