Zebra DS9908

Symbologies
215
Aztec
Parameter # 574
SSI # F1h 3Eh
Scan one of the following barcodes to enable or disable Aztec.
Aztec Inverse
Parameter # 589
SSI # F1h 4Dh
Scan one of the following barcodes to select the Aztec inverse decoder setting:
• Regular Only - The scanner decodes regular Aztec barcodes only.
• Inverse Only - The scanner decodes inverse Aztec barcodes only.
• Inverse Autodetect - The scanner decodes both regular and inverse Aztec barcodes.
NOTE: Enabling Aztec also enables Linked Aztec.
*Enable Aztec
(1)
Disable Aztec
(0)
Regular Only
(0)
Inverse Only
(1)
*Inverse Autodetect
(2)