Zebra DS9908 Product Reference Guide

User Preferences & Miscellaneous Options
60
Parameter Barcode Scanning
Parameter # 236
SSI # ECh
Scan one of the following barcodes to select whether to enable or disable the decoding of parameter barcodes,
including the Set Defaults barcodes.
Beep After Good Decode
Parameter # 56
SSI # 38h
Scan one of the following barcodes to select whether or not the scanner beeps after a good decode.
If you select Do Not Beep After Good Decode, the speaker still operates during parameter menu scanning and to
indicate error conditions.
*Enable Parameter Barcode Scanning
(1)
Disable Parameter Barcode Scanning
(0)
*Enable Beep After Good Decode
(1)
Disable Beep After Good Decode
(0)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)