Zebra DS9908

User Preferences & Miscellaneous Options
69
Hand-held Trigger Mode
Parameter # 138
SSI # 8Ah
Scan one of the following barcodes to select a trigger mode for the scanner:
• Standard (Level) - A trigger press activates decode processing. Decode processing continues until the
barcode decodes, you release the trigger, or the Decode Session Timeout on page 76 occurs.
• Presentation (Blink) - The scanner activates decode processing when it detects a barcode in its field of
view. After a period of non-use, the LEDs turn off until the scanner senses motion.
• *Auto Aim - The scanner projects the aiming pattern when lifted. A trigger press activates decode
processing. After a period of inactivity the aiming pattern shuts off.
Standard (Level)
(0)
Presentation (Blink)
(7)
*Auto Aim
(9)