Zebra DS9908 Product Reference Guide

Digimarc
359
Digimarc Digital Watermarks
Parameter # 1687
SSI # F8h 06h 97h
To enable or disable the Digimarc Digital Watermarks code scan the appropriate barcode below.
Enabling Digimarc Digital Watermarks/DW increases decode times slightly. Increasing the Timeout
Between Decodes, Same Symbol on page 76 may be required to avoid double decodes.
Enable Digimarc Digital Watermarks/DW
(1)
*Disable Digimarc Digital Watermarks/DW
(0)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)