Zebra DS9908 Product Reference Guide

USB Interface
233
USB Caps Lock Override
This option applies only to the USB Keyboard HID device. Scan Override Caps Lock Key to preserve the case of
the data regardless of the state of the Caps Lock key. This setting is always enabled for the Japanese Windows
(ASCII) keyboard type and can not be disabled.
Barcodes with Unknown Characters
This option applies only to the USB Keyboard HID and IBM devices. Unknown characters are characters the host
does not recognize. Scan Send Barcodes With Unknown Characters to send all barcode data except for
unknown characters. The scanner issues no error beeps.
Scan Do Not Send Barcodes With Unknown Characters for IBM devices to prevent sending barcodes
containing at least one unknown character to the host, or for
USB Keyboard HID devices to send the barcode
characters up to the unknown character. The scanner issues an error beep.
Override Caps Lock Key
(Enable)
*Do Not Override Caps Lock Key
(Disable)
*Send Barcodes with Unknown Characters
Do Not Send Barcodes with Unknown Characters

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)