Zebra DS9908

OCR Programming
317
OCR Lines
Parameter # 691
SSI # F1h B3h
To select the number of OCR lines to decode, scan one of the following barcodes. Selecting Visas, TD1, or TD2 ID
cards automatically sets the appropriate
OCR Lines. Also see OCR-B Variant on page 310.
OCR Minimum Characters
Parameter # 689
SSI # F1h B1h
To select the minimum number of OCR characters (not including spaces) per line to decode, scan the following
barcode, then scan a three-digit number between 003 and 100 using the barcodes in Numeric Barcodes
representing the number of OCR characters to decode. Strings of OCR characters less than the minimum are
ignored. The default is 003.
*OCR 1 Line
(1)
OCR 2 Lines
(2)
OCR 3 Lines
(3)
OCR Minimum Characters