Zebra DS9908 Product Reference Guide

User Preferences & Miscellaneous Options
67
Time Delay to Low Power Mode
Parameter # 146
SSI # 92h
Scan one of the following barcodes to set the time the scanner remains active before entering low power mode.
The scanner wakes upon trigger press or when the host attempts to communicate with the scanner.
NOTE: This parameter only applies when Low Power Mode is enabled.
1 Second
(17)
10 Seconds
(26)
1 Minute
(33)
5 Minutes
(37)
15 Minutes
(43)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)