Name: Zebra DS9908
Brand: Zebra
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Maintenance,

Troubleshooting, and

Technical Specifications

Introduction

This chapter provides suggested scanner maintenance, troubleshooting, technical specifications, and signal

descriptions (pinouts).

Maintenance

Known Harmful Ingredients

The following chemicals are known to damage the plastics on Zebra scanners and should not come in contact with

the device:

•Acetone

• Ammonia solutions

• Aqueous or alcoholic alkaline solutions

• Aromatic and chlorinated hydrocarbons

• Benzene

• Carbolic acid

• Compounds of amines or ammonia

• Ethanolamine

• Ethers

• Ketones

•TB-lysoform

• Toluene

• Trichloroethylene.

Approved Cleaners for the Scanner

• Isopropyl alcohol 70% (including pre-moistened wipes).

Other manuals for Zebra DS9908

Questions and Answers:

Need help?

Do you have a question about the Zebra DS9908 and is the answer not in the manual?

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)