Zebra DS9908 Product Reference Guide

User Preferences & Miscellaneous Options
62
Beep Tone
Parameter # 145
SSI # 91h
Scan one of the following barcodes to select a beep tone for audible feedback indicating a good decode. Select
from the Standard Beep Tones below or from the Special Tones on page 63.
Scan Disable Beep Tone to disable all tones.
Standard Beep Tones
Disable Beep Tone
(3)
Low Beep Tone
(2)
*Medium Beep Tone
(1)
High Beep Tone
(0)
Medium to High Beep Tone (2-tone)
(4)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)