Driver’s License Set Up (DS9908-DL/HL)
364
Parsing Driver’s License Data Fields (Embedded Driver's License Pars-
ing)
To program a parsing rule:
1. Scan Begin New Driver’s License Parse Rule on page 365.
2. Scan any of the field barcodes on the following pages, or Send Keystroke (Control Characters and
Keyboard Characters) on page 380.
3. After entering the entire rule, scan Save Driver’s License Parse Rule on page 365 to save the rule.
To abort the programming sequence at any time during programming, scan Quit Entering Driver’s License Rule on
page 365. Any previously saved rule is retained.
To erase a saved rule, scan Erase Driver’s License Parse Rules on page 365.
Embedded Driver's License Parsing Criteria - Code Type
After specifying the fields and their order for the parsed driver's license, you can also apply standard ADF rules to
the parsed data using the
Parsed Driver’s License criterion barcode in the
Advanced Data Formatting Programmer
Guide.
See Embedded Driver's License Parsing ADF Example on page 402 for a sample ADF rule using this code type
criterion.
NOTE: The scanner stores only one driver’s license parsing rule in memory at a time. Saving a new rule
replaces the prior rule.
NOTE: Only create standard ADF rules on parsed driver's license data when configured for Embedded Driver's
License Parsing.
To Next Page
Loading...
Need help?
General
