OCR Programming
324
characters used to delimit required literal strings; if one of the delimiter characters is present in the desired literal
string, use the other delimiter.
Template Valid data Invalid data
"35+BC" 35+BC AB+22
New Line (E)
To create a template of multiple lines, add
E between the template of each single line.
Template Valid data Valid data Invalid data
999EAAAA 321 987 XYZW
BCAD ZXYW 12
String Extract (C)
This operator combined with others defines a string of characters to extract from the scanned data. The string
extract is structured as follows:
CbPe
Where:
• C is the string extract operator
• b is the string begin delimiter
• P is the category (one or more numeric or alpha characters) describing the string representation
• e is the string end delimiter
“
+
E
To Next Page
Loading...