NoteAction
While using the screw driver between the
cradle and balancing device as a distance
tool, tighten the attachment screw com-
pletely.
12
Tightening torque: 280 Nm.
xx1300000663
Secure the balancing device.13
Concluding procedure
NoteAction
xx1300000664
Refit the retaining ring bore.1
xx1300000837
Refit the VK-cover.2
Continues on next page
374 3HAC044266-001 Revision: -
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.6.3 Replacing the rear bearing of the balancing device
Continued
To Next Page
Loading...
