Capintec CAPTUS 4000e - PREFACE; GENERAL; SYSTEM DESCRIPTION; MEDICAL EQUIPMENT SAFETY CLASSIFICATION

To Next Page

To Previous Page

CAPINTEC, INC. CAPTUS

4000e

July 16 PREFACE p-1

PREFACE

GENERAL ........................................................................................................ 1

SYSTEM DESCRIPTION .................................................................................. 1

MEDICAL EQUIPMENT SAFETY CLASSIFICATION ...................................... 2

ELECTROMAGNETIC INTERFERENCE POTENTIAL .................................... 2

INSTALLATION ............................................................................................... 3

IMPORTANT SAFETY INFORMATION ............................................................ 3

TRADEMARKS ................................................................................................ 3

GENERAL

Thank you for purchasing the Capintec line of Thyroid Uptake Measurement Systems. Every

effort has been made to ensure that the information in this document is complete, accurate,

and up-to-date. Mention of products manufactured by other companies does not necessarily

constitute endorsement by Capintec, Inc. Capintec assumes no responsibility for the results

of errors beyond its control.

Please address any comments pertaining to this manual to:

Capintec, Inc.

7 Vreeland Road

Florham Park, NJ 07932

Phone (800) ASK-4CRC

Fax (201) 825-1336

Note: Federal Law restricts this device to sale by or on the order of a physician,

pharmacist or other licensed professional.

SYSTEM DESCRIPTION

Your new CAPTUS

4000e is available in several configurations. Please take a moment to

review your system to determine exactly the configuration you have received. The basic

Thyroid Uptake System consists of the following:

• Floor Stand or Optional Table Top Stand

• TUS Collimator

• Isolation Transformer

• NaI (sodium iodide) Detector with Detector Socket Base

Note: Two versions of detectors are available: Flat Face or Drilled.