Capintec CAPTUS 4000e - Deleting Staff Member

To Next Page

To Previous Page

CAPINTEC, INC. CAPTUS

4000e

August 15 BIOASSAY 11-11

DELETING STAFF MEMBER

Note: Staff Members can only be deleted by the Administrator.

Note: If you wish to save Staff Member information before deleting, refer to CHAPTER 13:

ARCHIVE.

1. To select one or more staff members for deletion, click in the check box to the left of the

staff member name in the Staff Member Directory box on the Main Bioassay screen

(Figure 11-14). A check should appear in the check box to indicate it has been selected.

The staff member can also be selected by first highlighting the desired staff member by

clicking and then double-clicking anywhere in the grid to place a check in the box. To

deselect a staff member, click in their check box again or double-click anywhere in the

grid while the desired staff member is highlighted and the check will be removed from the

check box.

Note: The status of a check box can be toggled by quickly double-clicking the desired

item.

Figure 11-14

2. Select the Delete button. Figure 11-15 will appear.

Figure 11-15

3. Select the Yes button or press the Y key to confirm the deletion. Otherwise, select the No

button or press the N key to cancel the deletion.

4. To delete all the staff members at once, simply select the Delete All button. You will be

prompted to confirm the deletion. Figure 11-16 will appear.