CAPINTEC, INC. CAPTUS
®
4000e
August 15 ABSORBED DOSE ALERT 9-15
Figure 9-15
3. Click in the text box to be edited and type over the existing information.
Note: All fields in bold are required before you can begin the test.
4. When finished editing the patient data, select the Done button to save the entered
information, or the Cancel button to discard the changes.
5. To measure this patient now, select the Count button. Figure 9-20 Count Patient
Measurement Screen will appear.
DELETING PATIENTS
Note: If you wish to save patient information before deleting, refer to the sections
CREATING AN ARCHIVE on page 9-21 and OPENING AN ARCHIVE on page 9-22.
To select one or more patients for deletion, click in the check box to the left of the patient’s
name in the Patient Directory box on the Absorbed Dose ALERT Main Screen (Figure
9-16). A check should appear in the check box to indicate it has been selected. The patient
can also be selected by first highlighting the desired patient by clicking and then double-
clicking anywhere in the grid to place a check in the box. To deselect a patient, click in the
check box again or double-click anywhere in the grid while the desired patient is highlighted
and the check will be removed.
Note: The status of a check box can be toggled by quickly double-clicking the desired item.
To Next Page
Loading...