CAPINTEC, INC. CAPTUS
®
4000e
16-6 CLEANING AND MAINTENANCE July 16
SERVICING
The system is covered by a one year limited warranty, under normal conditions of use.
Other than the printer’s ink cartridges and the Isolation Transformer’s fuses (reference FUSE
SERVICING on page 16-9), there are no user serviceable parts contained in the system.
Every five years, the system should be returned to Capintec’s only Authorized Service
Center for a complete verification.
Capintec, Inc.
7 Vreeland Road
Florham Park, NJ 07932
Phone (800) ASK-4CRC
Fax (201) 825-1336
Collimator Block Inspection
Once a year, the Collimator Block should be inspected as follows:
1) Disassemble the Collimator Block Cable Cover by removing the two socket head cap
screws attaching the cover. (Figure 16-2)
Figure 16-2
To Next Page
Loading...