CAPINTEC, INC. CAPTUS
®
4000e
November 16 LAB TESTS 10-21
volumes respectively, for Females and Males, which can be considered normal for
the patient’s weight. They are entered as seen fit by the doctors. Out of range results
indicate a medical condition and will be flagged in the report. Entering these values is
optional.
2. To input new values in any frame, click in the appropriate text box or radio button or use
the Tab key to move from one selection to another.
3. Select the Done button to save changes or select the Cancel button to discard the
changes and return to Figure 10-27 I 125 Blood Volume Test Main Screen.
• The Administered to Standard Activity Ratio, Sample Volume and Counting Time
fields appear again, while adding a patient for the I-125 Blood Volume Test. Any
changes made on the Add Patient screen will override the default values entered in
the Setup.
• For greater flexibility, set Repetitions to 2, as the second repetition may be skipped if
desired, while performing the measurements.
• To return to previous screen without saving changes press the Esc key.
Adding Patients
Note: All fields in bold are required, before beginning the I-125 Blood Volume Test.
However, you may enter the Patient Name, Date of Birth and Patient ID alone,
select the Done button and input the remaining information later. The Patient Status
box on Figure 10-27 I 125 Blood Volume Test Main Screen will display the message
“Data Partially Entered”.
1. Select the Add button on Figure 10-27. The Patient Information screen appears as
shown in Figure 10-29, with information to be entered in three sections.
To Next Page
Loading...