ENGINE CONTROLS 1F–319
DAEWOO M-150 BL2
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Application NSm Lb-Ft Lb-In
Camshaft Position Sensor Bolts 10–14 – 89–124
Engine Coolant Temperature (ECT) Sensor 8–12 – 71–106
Crankshaft Position (CKP) Sensor Retaining Bolt 5–8 – 44–71
Electronic Ignition (EI) System Ignition Coil Retaining
Bolts
8–12 – 71–106
Evaporative Emission Canister Protective Cover 8 – 71
Electric Exhaust Gas Recirculation (EEGR) Valve
Retaining Bolts
20–30 15–22 –
Fuel Rail Retaining Bolts 18–22 13–16 –
Fuel Tank Strap Retaining Nuts 18–22 13–16 –
Knock Sensor Bolt 15–25 11–18 –
Intake Air Temperature (IAT) Sensor 20–30 15–22 –
Manifold Absolute Pressure (MAP) Sensor Retaining
Bolt
8–12 – 71–106
Oxygen Sensor 35–44 26–33 –
Heated Oxygen Sensor 35–44 26–33 –
Throttle Body Retaining Bolt 9–12 – 80–106
ECM Mounting Bolts 6–8 – 53–71
SPECIAL TOOLS
SPECIAL TOOLS TABLE
D102F101
Scan Tool
D12F102A
DW–140–010A
Fuel Pump Lock Ring
Remover/Installer
To Next Page
