1‑78
Chapter 1 Troubleshooting
Version 2 2007.05.22
FAX
Communication
035-730 Fax
Job Failure
Press 3
<RS Request CS NOT ON>
The Modem CS not turning on to RS Request at
High-Speed Training.
FIP-1. 34
Communication
035-737 Fax
Job Failure
Press 3
<CTC/EOR Resend Over>
Exceeds the predetermined value of the resending.
FIP-1. 69
Communication
035-739 Fax
Job Failure
Press 3
<T5 Time Out>
The T5 Time Out error occurred.
FIP-1. 69
Communication
035-740 Fax
Job Failure
Press 3
<ECM Send EOR-Q Send>
Sent EOR-Q at ECM transmission.
FIP-1. 69
Communication
035-741 Fax
Job Failure
Press 3
<ECM Flame Time Out>
The flame Timeout at ECM.
FIP-1. 69
Communication
035-742 Fax
Job Failure
Press 3
<ECM Receive EOR-Q Receive>
Received EOR-Q at ECM.
FIP-1. 69
No Dial Tone
035-746 Fax
Job Failure
Press 3
<Before Dial first Dial Tone>
Failed to Detect Dial Tone before Dialing.
FIP-1. 77
No Dial Tone
035-749 Fax
Job Failure
Press 3
<End Dial Not Response>
No Response after Dialing.
FIP-1. 35
Communication
035-771 Fax
Job Failure
Press 3
<FSK CS NOT ON>
The CS does not turn on at the FSK.
FIP-1. 34
Communication
035-772 Fax
Job Failure
Press 3
<ECM Illegal Frame Receive>
Received Illegal Flame at ECM.
FIP-1. 69
No Dial Tone
035-773 Fax
Job Failure
Press 3
<Before Dial Second Dial Tone>
Failed to Detect Second Dial Tone before Dialing
FIP-1. 77
No Dial Tone
035-774 Fax
Job Failure
Press 3
<During Dial Second Dial>
Failed to Detect Second Dial Tone during Dialing.
FIP-1. 77
Communication
035-777 Fax
Job Failure
Press 3
<RTC Not Detect>
No RTC Detected at Decoding.
FIP-1. 34
Problem Error Message Error Contents
Relevant
FIP