Dell 3115CN - Removal 64 PWBA HYUI (PL13.4.1)

3 - 94
Chapter 3 Removal and Replacement Procedures (RRPs)
Version 1 2006.11.28
Removal 64 PWBA HYUI (PL13.4.1)
Use a wristband to protect the PWB from electrostatic damage.
Steps 1 through 7 are for reference. Before removing this component, check that Steps 1 through 7
have been performed.
1) Remove the REAR COVER. (Removal 49)
2) Remove the COVER BOTTOM. (Removal 50)
3) Remove the COVER POLE IN L. (Removal 57)
4) Remove the COVER POLE L. (Removal 58)
5) Remove the BOX ASSY PRT AIO. (Removal 60)
6) Remove the BOX ASSY FAX AIO. (Removal 62)
7) Remove the PWBA FAX. (Removal 63)
8) Remove the five screws (silver, 6mm) that fix the PWBA HYUI (PL13.4.1) to the BOX ASSY
FAX AIO (PL13.4.4).
9) Remove the PWBA HYUI from the BOX ASSY FAX AIO.
10) Remove the SUPPORT FAXs (PL13.4.2) from the PWBA HYUI by releasing the hooks.
Gnb03173KA
9)
8)
8)
10)
10)
8)
8)
8)