Dell 3115CN - Replacement 75 KIT TRAY MAIN (PL13.8.10)

3 - 225
Chapter 3 Removal and Replacement Procedures (RRPs)
Version 1 2006.11.28
Replacement 75 KIT TRAY MAIN (PL13.8.10)
1) Mate the front side boss of the KIT TRAY MAIN with the hole of the ADF ASSY.
2) Mate the boss of the KIT TRAY MAIN with the hole of the ADF ASSY by bending the rear side
mounting section of the KIT TRAY MAIN.
3) Close the cover of the ADF ASSY.
Gnb03225KA
3)
2)
1)