Dell 3115CN - Printing the Parameter List

2 - 64
Chapter 2 Operation of Diag.
Version 1 2006.11.21
Reference Counter Values
These counter values are reference only. Do not use as the official value.
4.6.14 Printing the parameter list
This function prints the parameter values and life counter values stored in the IOT.
Counter Name Value of life warning
Life Y Toner (Dispense time) -
Life M Toner (Dispense time) -
Life C Toner (Dispense time) -
Life K Toner (Dispense time) -
Life DTB (Transfer Belt) 1 (Paper feeding count) 100000
Life Fuser (Paper feeding count) 100000
Life Printer (Paper feeding count) -
Life DTB (Transfer Belt) 2 (Waste Toner cleaning count) 200000
Life DTB (Transfer Belt) 3 (Cycle count) 14000000
Life Y Waste Toner (Waste Toner cleaning count) 18000
Life M Waste Toner (Waste Toner cleaning count) 18000
Life C Waste Toner (Waste Toner cleaning count) 18000
Life K Waste Toner (Waste Toner cleaning count) 18000
Life Y Developer (Cycle count) 2500000
Life M Developer (Cycle count) 2500000
Life C Developer (Cycle count) 2500000
Life K Developer (Cycle count) 2500000
Life Y Drum (Cycle count) 3000000
Life M Drum (Cycle count) 3000000
Life C Drum (Cycle count) 3000000
Life K Drum (Cycle count) 3000000
Life MPF Feed -
Life Tray 1 Feed -
Life Duplex Feed -
Print -