Dell 3115CN - Print Image Quality Specifications

1‑208
Chapter 1 Troubleshooting
Version 1 2006.11.21
4) Toner spots appear on the page/printing is blurred:
a) Check the toner cartridge to make sure it is installed correctly.
b) Change the toner cartridge.
5) Entire page is white:
a) Make sure the packaging material is removed from the toner cartridge.
b) Check the toner cartridge to make sure it is installed correctly.
c) The toner may be low. Change the toner cartridge.
6) Streaks appear on the page:
a) The toner may be low. Change the toner cartridge.
b) If you are using preprinted forms, make sure the toner can withstand temperatures of 0°C to
35°C.
7) Characters have jagged or uneven edges:
a) Change the Print Mode in the Graphics tab (or Advanced dialog box) to Standard in the
printer driver.
b) If you are using downloaded fonts, verify that the fonts are supported by the printer, the host
computer, and the software program.
8) Part or all of the page prints in black:
a) Check the toner cartridge to make sure it is installed correctly.
9) The job prints, but the top and side margins are incorrect:
a) Make sure the Paper Size setting in the Tray Settings is correct.
b) Make sure the margins are set correctly in your software program.
10) Printing on both ends of the transparencies is faded:
a) This occurs when the printer is operating in a location where relative humidity reaches 85% or
more. Adjust the humidity or relocate the printer to an appropriate environment.
7.3 Print Image Quality Specifications
Conditions of Guaranteed Image Quality
The image quality shall be guaranteed under the following conditions.
1) Environmental Condition
Temperature: 10°C - 32°C
Humidity:15% RH - 85% RH (85% RH at 28°C)
Note that defect may occur due to condensation after around 30 minutes if the printer is turned on
in an critical environment such as 85% at 10°C.
2) Guaranteed Paper
The print image quality specified in this chapter shall be guaranteed when the standard paper is
fed from the paper tray. The print image quality is evaluated on the maximum size of each standard
paper.
Color print quality: X-Pression paper
Black and White quality: 4200 paper
3) Paper condition