1‑15
Chapter 1 Troubleshooting
Version 2 2007.05.22
E
No
Yes
Receive a fax from another fax
terminal.
END
Check that [Secure Receive]
under Admin Menu is not set to
"Enable".
NOTE:
Default setting is "Disable".
NoYes
Correct the setting.
See"2.2 Menus to be
configured at installation.
Connect additional devices such
as external telephone and
answering machine, according to
the User's Guide.
Reception successful?
Is the Ans Select setting
correct?
Check value of [Auto Answer
Fax] under [Fax Settings].
NoYes
Does the value exceed
30?
Set the value below 30.
Replace PWBA HYUI.
To Next Page
Loading...
