Chapter 8
| Authentication Commands
PPPoE Intermediate Agent
– 299 –
Example
Console(config)#interface ethernet 1/5
Console(config-if)#pppoe intermediate-agent vendor-tag strip
Console(config-if)#
clear pppoe
intermediate-agent
statistics
This command clears statistical counters for the PPPoE Intermediate Agent.
Syntax
clear pppoe intermediate-agent statistics interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Command Mode
Privileged Exec
Example
Console#clear pppoe intermediate-agent statistics
Console#
show pppoe
intermediate-agent
info
This command displays configuration settings for the PPPoE Intermediate Agent.
Syntax
show pppoe intermediate-agent info [interface [interface]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Command Mode
Privileged Exec
Example
Console#show pppoe intermediate-agent info
PPPoE Intermediate Agent Global Status : Enabled
PPPoE Intermediate Agent Admin Access Node Identifier : 192.168.0.2
PPPoE Intermediate Agent Oper Access Node Identifier : 192.168.0.2
To Next Page
Loading...
Need help?
General