Chapter 8
| Authentication Commands
PPPoE Intermediate Agent
– 300 –
PPPoE Intermediate Agent Admin Generic Error Message :
PPPoE Intermediate Agent Oper Generic Error Message :
PPPoE Discover packet too large to process. Try reducing the number of tags
added.
Console#show pppoe intermediate-agent info interface ethernet 1/1
Interface PPPoE IA Trusted Vendor-Tag Strip Admin Circuit-ID Admin Remote-ID
--------- -------- ------- ---------------- ------------ ----------------
Eth 1/2 Yes Yes Yes 1/2:vid 00-00-E8-94-40-02
R-ID Delimiter Delimiter ASCII Oper Circuit-ID Oper Remote-ID
---------------- ---------------- ---------------- -----------------
Yes 3 1/2:vid 00-00-E8-94-40-02
Console#
show pppoe
intermediate-agent
statistics
This command displays statistics for the PPPoE Intermediate Agent.
Syntax
show pppoe intermediate-agent statistics interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Command Mode
Privileged Exec
Example
Console#show pppoe intermediate-agent statistics interface ethernet 1/1
Eth 1/1 statistics
-----------------------------------------------------------------------------
Received : All PADI PADO PADR PADS PADT
---------- ---------- ---------- ---------- ---------- ----------
3 0 0 0 0 3
Dropped : Response from untrusted Request towards untrusted Malformed
----------------------- ------------------------- ---------
0 0 0
Console#
Table 51: show pppoe intermediate-agent statistics - display description
Field Description
PADI PPPoE Active Discovery Initiation
PADO PPPoE Active Discovery Offer
PADR PPPoE Active Discovery Request
To Next Page
Loading...
