Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 62 –
Show VLAN Member Shows the interfaces assigned to a VLAN through GVRP 173
Tunnel IEEE 802.1Q (QinQ) Tunneling 177
Configure Global Sets tunnel mode for the switch 181
Configure Service Sets a CVLAN to SPVLAN mapping entry 182
Configure Interface Sets the tunnel mode for any participating interface 184
Protocol 185
Configure Protocol 186
Add Creates a protocol group, specifying supported protocols 186
Show Shows configured protocol groups 186
Configure Interface 187
Add Maps a protocol group to a VLAN 187
Show Shows the protocol groups mapped to each VLAN 187
IP Subnet 189
Add Maps IP subnet traffic to a VLAN 189
Show Shows IP subnet to VLAN mapping 189
MAC-Based 191
Add Maps traffic with specified source MAC address to a VLAN 191
Show Shows source MAC address to VLAN mapping 191
Mirror 193
Add Mirrors traffic from one or more source VLANs to a target port 193
Show Shows mirror list 193
Translation 195
Add Maps VLAN IDs between the customer and service provider 195
Show Displays the configuration settings for VLAN translation 195
MAC Address 197
Learning Status Enables MAC address learning on selected interfaces 197
Static 199
Add Configures static entries in the address table 199
Show Displays static entries in the address table 199
Dynamic
Configure Aging Sets timeout for dynamically learned entries 201
Show Dynamic MAC Displays dynamic entries in the address table 201
Clear Dynamic MAC Removes any learned entries from the forwarding database and clears
the transmit and receive counts for any static or system configured
entries
203
Table 4: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General