Hioki 8835-01 - Settings for 8946 4 ch ANALOG UNIT

130
────────────────────────────────────────────────────
7.4 Making the Settings of the 8937 VOLTAGE/TEMP UNIT
────────────────────────────────────────────────────
Displays the measurement mod
e
7
.4.1 Setting Input for the VOLTAGE/TEMP UNIT
7
.4 Making the Settings of the 8937 VOLTAGE/TEMP
UNIT
The 8937 VOLTAGE/TEMP UNIT allows measurement of voltage or
temperature on any channel.
・Choose whether you want to measure voltage or temperature.
・When measuring temperature, select the thermocouple to be used.
・Resetting the system puts it in the voltage mode.
Method Screen: CHANNEL 1
1. Call up the CHANNEL 1 screen.
2. Move the flashing cursor to the point shown
in the figure on the left.
3. Use the JOG control or the function keys to
make the selection.
: Move the cursor up in the selection window.
: Move the cursor down in the selection
window.
VOLTAGE: Set for voltage measurement
TMP-＊: Set for temperature adjustment
The thermocouple used is selected at
the same time.