Hioki 8835-01 - System Reset [SYSTEM RESET]

219
────────────────────────────────────────────────────
9.4 Scaling Function [ SCALING ]
────────────────────────────────────────────────────
9
.4.3 Unit Entry Procedure
The unit (EU) after scaling is entered.
Method Screen: SYSTEM 2 (SCALING)
1. Move the flashing cursor to the position
shown in the figure on the left.
2. Use the function keys to make the
selection.
: Enter the unit.
: Select from the unit list.
: Clear the set unit.
3. Enter the unit name.
For details on unit input, see Section 9.5.5.
4. When List is selected, the unit setting is
selected by the displayed function keys.
: Move the cursor up in the selection window.
: Move the cursor down in the selection window.
: Enter the selected unit .
: Cansel.