3.5 Using a PC Card on a Personal Computer
Flash ATA card and hard disk card inserted in PC card slot are ready for use
without any other setting.
The SRAM card cannot be used in the initial setup state of Windows 95.
It is necessary to make the following settings.
(1) Open Explorer.
(2) In the Explorer View menu, click Options. In the View tab of the dialog
box, under Hidden Files, select "Show All Files," and click OK to close the
dialog box.
(3) With Explorer, find the file config.sys in the Window 95 folder.
(4) Click the config.sys file, to edit it with Notepad or another editor.
(5) Add the following to the config.sys file.
DEVICE=DRIVE:\WINDOWS\SYSTEM\CSMAPPER.SYS
DEVICE=DRIVE:\WINDOWS\SYSTEM\CARDDRV.EXE/SLOT=The number of slots
Here the DRIVE is the drive on which Windows 95 is installed.
Example: for a PC/AT compatible
DEVICE=C:\WINDOWS\SYSTEM\CSMAPPER.SYS
DEVICE=C:\WINDOWS\SYSTEM\CARDDRV.EXE/SLOT=2
(6) Restart the computer. Turn the power temporarily off and then on again.
This completes the setting process.
If the settings are correct, the PC card drive will appear as a removable
drive in the "My Computer" folder.
Install the SRAM card driver supplied with the personal computer.
For more details, refer to its instruction manual.
To Next Page
Loading...
