.1 Outline
The recorder function has the following features.
(1) Real time display and printing of the input signal
(2) Real time continuous recording of the input signal
(3) All input channel data are recorded on the same time axis.
Since data for all channels can be superimposed, the relative relationship
between input signals can be observed visually.
(4) Time axis setting
10 ms//DIV to 1 h/DIV
(5) Time axis resolution 100 points/DIV (printer)
(6) High-speed sampling
The setting range is max. 1 MS/s. The available range depends on the selected
time axis range (input signal waveform capture rate).
(7) Waveform magnification/compression display and printout
・Time axis direction: ×1to×1/200
・Voltage axis direction: ×10 to ×1/2
With the variable function
(8) Display format
・Time axis waveform: single, dual, quad screen display
・X-Y waveform: dot, line
(9) Scrollable display
・The most recent 2000 divisions
(*1)
of the data are stored in memory.
・It is possible to scroll back for easy review.
(10) Additional recording function
(11) Logging function
Numeric printout of waveform data
(12) Reprint function
The most recent 2000 divisions
(*1)
of the data stored in memory can be printed
as many times as required.
*1: See "Waveform storage" in Section 14.4.
To Next Page
Loading...
