Hioki 8835-01 - Chapter 7 Input Channel Settings; Overview; Selecting Channels (Memory Recorder Function Only)

117
────────────────────────────────────────────────────
7.1 Overview
────────────────────────────────────────────────────
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
NOTE
Chapter
7
Input Channel Setting
s
7
.1 Overview
7
.2 Selecting Channels (Memory Recorder Function
Only)
(For all functions)
・Input channel settings are made with the CHANNEL screen of each function.
・The 8835-01 can use up to 8 analog and 16 logic channels.
・Settings are made separately for one analog channel or four logic channels (1
probe).
・Before making input channel settings, use the SYSTEM screen to select the
channels to be used (see Section 9.3.1).
・Perform this setting before making the input channel settings in the memory
recorder function.
・This setting on the SYSTEM 1 screen determines the channels in use.
Use the menu items SETUP and (1) using channel.
・For details, see Section 9.3.1.
09-01
Depending on the channels in use, the recording length of the memory
recorder function differs.