Hioki 8835-01 - Power Supply and Ground Connection

14
────────────────────────────────────────────────────
2.2 Power Supply and Ground Connection
────────────────────────────────────────────────────
WARNIN
G
Take care never to exceed the power supply ratings given below, to avoid
the risk of electric shock and damage to the unit.
NOTE
WARNIN
G
The 8835-01 has no protective ground terminal, but is intended to be
connected to a ground wire via the grounded three-core power cord
supplied. To avoid electric shock and ensure safe operation, connect the
power cable to a grounded (3-contact) outlet.
2
.2 Power Supply and Ground Connection
The fuse is incorporated in power supply. It is not user-replaceable. If a
problem is found, contact your dealer or HIOKI representative.
Power supply, fuse
Rated power supply voltage 100 to 120 V AC / 200 to 240 V AC
(auto-switching)
(Voltage fluctuations of 10% from the rated
supply voltage are taken into account.)
Rated AC power supply frequency 50/60 Hz
Fuses AC incorporated in power supply
(not user-replaceable)
Grounding
・When the AC outlet is of the grounded three-pin type:
Use the grounded three-core power cord supplied. The unit will be grounded
automatically.
・When the AC outlet is not of the grounded three-pin type:
Use the ground adapter supplied. In this case, be absolutely sure to connect
the green ground wire which protrudes from the adapter to a ground line,
and connect the power cord supplied.
Check the following points before connecting the unit to a power supply:
・The power supply matches the ratings shown above.
・The AC power switch of the 8835-01 and the switch of the 9439 DC POWER
ADAPTER are set to OFF.
・Use only the supplied AC power cord.