Hioki 8835-01 - Making the Settings of the 8939 STRAIN UNIT; Setting the Waveform Display Color; Setting the Waveform Display Graph Type; Setting the Measurement Range

137
────────────────────────────────────────────────────
7.6 Making the Settings of the 8939 STRAIN UNIT
────────────────────────────────────────────────────
Displays the type of the installed un
it
7
.6.1 Setting the Waveform Display Color
7
.6.2 Setting the Waveform Display Graph Type
7
.6.3 Setting the Measurement Range
7
.6 Making the Settings of the 8939 STRAIN UNIT
This section explains the settings of the 8939 STRAIN UNIT.
The 8939 STRAIN UNIT is a unit for making measurements using a strain
gauge adapter.
Set the display color for the waveform.
For the setting, see Section 7.3.1.
Set the display format for the waveform display screen.
For the setting, see Section 7.3.2.
・The measurement range for each channel is set.
・The set value denotes the range for 1 DIV vertically.