Hioki 8835-01 - Key Check; PC Card Check

244
────────────────────────────────────────────────────
9.8 Self Check
────────────────────────────────────────────────────
9
.8.4 Key Check
NOTE
9
.8.5 PC Card Check
NOTE
This test checks the key operation.
Method Screen: SYSTEM 6 (SELF CHECK)
1. Move the flashing cursor to the position
shown in the figure on the left.
2. Press
F1 [exec] to start the test.
3. Press any key on the front panel, and the
corresponding field on the display changes to
reverse.
4. Turn the JOG and SHUTTLE controls at least
one turn fully clockwise and
counterclockwise and press each of the keys
at least once, and the test is completed.
・If any key is defective, the key test cannot not be completed normally.
・In this case, press the
START key and the STOP key together to return to
the SELF CHECK screen.
・The
START key and Select key also serve for testing the LED function.
This test checks the PC card and displays the information.
Method Screen: SYSTEM 6 (SELF CHECK)
1. Move the flashing cursor to the position
shown in the figure on the left.
2. Press F1 [exec] to check the PC card.
In the case of the interface card, its identification is displayed.